Redresseur de Vienne

Crédit image:
Uwe Drofenik
licence CC BY-SA 3.0 🛈
Le redresseur de Vienne est un redresseur à modulation de largeur d'impulsion (PWM), développé en 1993 par Johann W. Kolar, à l'Université technique de Vienne, en Autriche[1],[2].
Caractéristiques
- Redresseur triphasé à trois niveaux et trois interrupteurs avec tension de sortie contrôlée [3]
- Correction du facteur de puissance (PFC) [4]
- Système Boost (courant d'entrée continu)
- Flux de puissance unidirectionnel [5]
- Densité de puissance élevée
- Faibles émissions d'interférences électromagnétiques (EMI) en mode commun
- Contrôle simple pour stabiliser le potentiel du point neutre [6]
- Faible complexité et facile à mettre en œuvre [5]
- Faible pertes de commutation [7]
- Comportement fiable sous des tensions de réseau fortement déséquilibrées et en cas de panne de secteur [8]
Topologie
Le redresseur de Vienne est un redresseur unidirectionnel triphasé à trois commutateurs à modulation de largeur d'impulsion (PWM) à trois niveaux. Il peut être considéré comme un pont de diodes triphasé avec un convertisseur élévateur intégré[9].
Références
- (en) Cet article est partiellement ou en totalité issu de l’article de Wikipédia en anglais intitulé « Vienna rectifier » (voir la liste des auteurs).
- ↑ J. W. Kolar, „Dreiphasen-Dreipunkt-Pulsgleichrichter“, filed Dec. 23, 1993, File No.: AT2612/93, European Patent Appl.: EP 94 120 245.9-1242 intitulé “Vorrichtung und Verfahren zur Umformung von Drehstrom in Gleichstrom”.
- ↑ (en) Johann W. Kolar, « VIENNA Rectifier II—A Novel Single-Stage High-Frequency Isolated Three-Phase PWM Rectifier System », IEEE Transactions on Industrial Electronics, vol. 46, no 4, (DOI 10.1109/TIE.2004.841096, lire en ligne)
- ↑ J. W. Kolar, F. C. Zach, “A Novel Three-Phase Utility Interface Minimizing Line Current Harmonics of High-Power Telecommunications Rectifier Modules”, Record of the 16th IEEE International Telecommunications Energy Conference, Vancouver, Canada, Oct. 30 - Nov. 3, pp. 367-374 (1994) DOI 10.1109/INTLEC.1994.396642.
- ↑ (en) Johann Miniböck et Johann W. Kolar, « Novel Concept for Mains Voltage Proportional Input Current Shaping of a VIENNA Rectifier Eliminating Controller Multipliers », IEEE Transactions on Industrial Electronics, IEEE, vol. 52, no 1, , p. 162–170 (DOI 10.1109/TIE.2004.841096, S2CID 28930599, lire en ligne, consulté le )
- J. W. Kolar, H. Ertl, F. C. Zach, “Design and Experimental Investigation of a Three-Phase High Power Density High Efficiency Unity Power Factor PWM (Vienna) Rectifier Employing a Novel Integrated Power Semiconductor Module”, Proceedings of the 11th IEEE Applied Power Electronics Conference, San Jose (CA), USA, March 3–7, Vol.2, pp.514-523 (1996) DOI 10.1109/APEC.1996.500491.
- ↑ J. W. Kolar, U. Drofenik, F. C. Zach, “Space Vector Based Analysis of the Variation and Control of the Neutral Point Potential of Hysteresis Current Controlled Three-Phase/Switch/Level PWM Rectifier Systems”, Proceedings of the International Conference on Power Electronics and Drive Systems, Singapore, Feb.21-24, Vol.1, pp.22-33 (1995) DOI 10.1109/PEDS.1995.404952.
- ↑ Dr. Uwe Drofenik, « How to Design a 10kW Three-Phase AC/DC Interface Step by Step », www.gecko-research.com, Gecko-Research GmbH, (consulté le )
- ↑ J. W. Kolar, U. Drofenik, F. C. Zach, “Current Handling Capability of the Neutral Point of a Three-Phase/Switch/Level Boost-Type PWM (Vienna) Rectifier”, Proceedings of the 27th IEEE Power Electronics Specialists Conference, Baveno, Italy, June 24–27, Vol.II, pp.1329-1336 (1996) DOI 10.1109/PESC.1996.548754.
- ↑ Sam Ben-Yaakov, « Intuitive explanation of the three phase Vienna rectifier », YouTube (consulté le )